Void Time & Decant Savings (ROI)

Void Time & Decant Savings (ROI)

Add2Rad reduces programme risk by shortening installs and keeping residents in place.

🎯 Why This Matters

• Void days = lost rent
• Decanting = hotel + transport + admin
• Redecoration = extra trades + delays

Add2Rad keeps the radiator and adds emitter area at skirting level, so installs complete in single access windows with minimal or zero voids.

🧮 Quick ROI Model (Copy/Paste Ready)

Inputs (editable):

• Properties: N
• Avg. rent/day loss (void): £VR
• Decant cost per property (if used): £DC
• Install days (full rad swap): D_full
• Install days (Add2Rad): D_A2R
• Redecoration cost per property (swap only): £RD

Savings per property:

Programme-level saving:

📊 Worked Example

• N = 250 homes
• £VR = £22/day
• £DC = £450 (typical single-night + logistics)
• D_full = 3 days vs. D_A2R = 1 day
• £RD = £180 (patch/paint typical)

Per-home:

• Void: (3−1)×£22 = £44
• Decant: £450
• Redecor: £180
• Total: £674 / home

Programme: 250 × £674 = £168,500 saved

Numbers are illustrative; replace with your actual rates.

📋 Evidence to Capture (for Boards & Audits)

• Pre/post flow & return temps; target 35–45 °C design
• Room comfort snapshots (°C at 15–30 min intervals)
• Installer time-on-site logs (per room/per dwelling)
• Resident access success rate (%) and complaints log
• Photos: before, during, after — with emitter metres recorded

Download compliance templates →

🔧 Delivery Playbook

1. Pre-survey: identify rooms & metres (3–6 m typical)
2. Resident comms: 48-hour notice, 4–6 hour window
3. Install: 1-day, in-occupation, no redecoration
4. Commission: balance, comfort check, handover sheet
5. Data log: time, metres, temps, photos → upload

Resident letters & FAQs →

Ready to Model Your Stock?

• Send us your property count, void/day rate, and decant policy
• We’ll return an ROI snapshot and phased rollout plan

👉 Request ROI snapshot
👉 View case studies
👉 Join framework partner list

Add More Heat. Radically Less Disruption.